Initio USB Devices Driver

Driver Download. On the next screen, go to Driver tab and click on Update Driver button. On the next screen, click on Search Automatically for updated driver software option. After installing updated driver, see if your computer is able to recognize the USB device. Initio Usb Device Driver Software Abstract Device Driver v.1.0 Abstract Character Device Driver, may be used for fast implementing user-spacedevice drivers for test purposes or working with non time critical devices.It's allow use device's I/O ports or memory areas directly, through standarddevice spec. File Name:Abstract Device Driver. Initio Corporation INIC-1618L SATA USB VID13fd&PID0840 Select the driver for your operating system and its bit. It is recommended to install a later version of the driver (see the release date).

  1. Initio Usb Devices Driver Updater
  2. Initio USB Devices Driver
  • USBdevice manufacturers need to support the Universal Serial Bus (USB) specification. The USB interface is implemented in two levels: The lower level of the USB protocol is implemented via a Serial Interface Engine (SIE). The higher layer of the. ...

    • WinDriver USB Device
    • Jungo
    • Shareware ($2499.00)
    • 32.42 Mb
    • Win98, WinME, Windows2000, WinXP, Windows2003, Windows Vista, Linux, Windows CE, Windows Mobile 2005
  • Recoveryfix DeviceDriver Backup software searches for all the existing device drivers on the computer system. The software generates detailed information about installed device drivers and determines lost or missing system device drivers.

    • device-driver-backup.exe
    • Device Driver BackupSoftware
    • Shareware ($19.95)
    • 1.27 Mb
    • Win2000, Win7 x32, Win7 x64, Win98, WinServer, WinVista, WinVista x64, WinXP
  • DeviceDriver for the ACS USB servo controller (USBB-01 interface card). HID class USBdevice to contoll eight RC type servos, eight optically isolated current inputs and 8 current sink. ...

    • AcsSave4.gz
    • usbservoctrl
    • Freeware (Free)
    • 19 Kb
    • BSD; Linux
  • TiVo USB Wireless Adapter devicedriver for Linux and Windows. The adapter users the Broadcom BCM4320 (AirForce One. Single-Chip 802.11g USB 2.0 Transceiver) chipset and portions of this project may be directly applicable to other devices using the. ...

    • tivownet_loadfw-0.1.tar.gz
    • tivousbwifi
    • Freeware (Free)
    • 83 Kb
    • Windows; BSD; Linux
  • Windows driver backup to keep the system drivers at safe place and have them when you upgrade or reinstall the operating system. Device Driver Backup software to create backup of system drivers and restore them when you reinstall the operating system or upgrade the system. The driver CD is required at the time of installing the OS.

    • cdriverbackup.exe
    • Driver Backup
    • Shareware ($19.95)
    • 1.22 Mb
    • Windows98, WinXP, Windows2000, Windows2003, Windows Vista
  • FOBS based devicedriver designed primarily to hide or deny access to files, folders and registry keys on the Microsoft Windows family of OS. It provides the ability to completely hide the presence of an application and discourage tampering.

    • filelock01.zip
    • Research Lab Inc
    • Shareware ($399.00)
    • 580 Kb
    • Pocket PC
  • Linux HFI DeviceDriver for IBM's PERCS integrated high speed HFI Linux HFI Device Driver for IBM's PERCS integrated high speed HFI network..

    • hfi_general_desc_v2.1.txt
    • hfidevicedriver
    • Freeware (Free)
    • 18 Kb
    • Linux
  • Linux InfiniBand DeviceDriver for IBM Host Channel Adapter for eServer and eHEA ethernet devicedriver for IBM eServer System Linux InfiniBand Device Driver for IBM Host Channel Adapter for eServer and eHEA ethernet device driver for IBM eServer System p.

    • Linux Device Driver for IBMeHCA , eHEA
    • ibmehcad
    • Freeware (Free)
    • 37 Kb
    • Linux
  • Linux USB PVR Driver (Pinnacle Bungee, Hauppauge WinTV Linux USB PVR Driver (Pinnacle Bungee, Hauppauge WinTV PVR).

    • pvrusb-1.2.tar.gz
    • pvrusb
    • Freeware (Free)
    • 12 Kb
    • BSD; Linux
  • Development of a devicedriver for the USBVision (NT1003/NT1004/NT1005) Development of a device driver for the USBVision (NT1003/NT1004/NT1005) chipset.

    • usbvision-0.9.8.3.tar.gz
    • usbvision
    • Freeware (Free)
    • 84 Kb
    • BSD; Linux
  • Version 1.8 of the Linux DT3155 device driver. Works with kernels 2.

    • dt3155-v1.8.1.tar.gz
    • Andy Dougherty, Jason M.LaPenta, Noah J. Cowan,Scott Smedley
    • Freeware (Free)
    • 79 Kb
    • Linux
  • mvsdasd is a Linux device driver for legacy MVS-Formatted Direct Access Storage Devices (aka DASD).

    • z/OS dasd device driver forzlinux
    • Jacob Dekel
    • Freeware (Free)
    • Windows

Related:USBInitio Usb Device Driver - Initio Usb Default Controller - Device Driver For Usb - Driver Usb Device - Lg Usb Device Driver
Pages : 1 2 3>

In case you are experiencing USB Device Not Recognized Error, whenever you plug in a USB mouse or Keyboard, you can make use of the following methods to Fix USB Device Not Recognized error in Windows 10.

USB Device Not Recognized Error in Windows 10

USB Device not recognized error in Windows 10 is not only noticed while connecting new USB devices, it is also noticed in case of USB devices like your Mouse or Keyboard that are already plugged into the computer.

Irrespective of the case, you should be able to fix USB Device not recognized error in Windows 10 by using one of the following methods.

  1. Disconnect USB Devices and Restart
  2. Unplug Computer From Power Cable
  3. Update Device Drivers
  4. Check For Updates
  5. Disable USB Selective Suspend Setting
  6. Change Power Management Settings
  7. Uninstall Faulty Device Drivers

Initio Usb Devices Driver Updater

Make sure that you do not skip the first and the second methods as listed below.

1. Disconnect USB Devices and Restart

Disconnect all USB devices and then Restart your computer.

Once the computer restarts, plug back the USB device into the same USB port which was not recognizing it. If this does not work, try connecting the device to other USB ports on your computer.

2. Unplug Computer From Power Source

The reason for USB device not recognized error in Windows 10 could be due to your computer going through minor software glitches.

To clear this, simply Power OFF your computer and also unplug it from the power source. Wait for 5 minutes and Restart your computer.

Sometimes, this simple step can fix USB device not recognized error on your computer.

3. Update Device Drivers

Initio USB Devices Driver

Your Windows computer should automatically update the firmware for all device drivers. However, this may not always happen, resulting in device drivers becoming outdated.

1. Right-Click on the Start button and click on Device Manager option.

2. On the device Manager Screen, expand the entry for Universal Serial Bus Controllers.

3. In the expanded Universal Serial Bus Controllers, right-click on the Unknown device and click on Properties.

4. On the next screen, go to Driver tab and click on Update Driver button.

5. On the next screen, click on Search Automatically for updated driver software option.

After installing updated driver, see if your computer is able to recognize the USB device.

4. Check For Updates

See if an Update is available for your computer. If an update is available, Windows will also install the latest available drivers for your computer.

1. Click on the Start button > Settings Icon > Updates & Security.

2. On the Update and Security screen, click on Windows Update in the side menu and click on Check For Updates button.

3. Allow Windows to check for available updates and install them onto your computer

Initio usb devices driver device

In case updates are available, the latest available device drivers will also be installed on your computer.

5. Disable USB Selective Suspend Setting

By default, Windows computer is set to conserve power by suspending power supply to external USB devices, whenever they are inactive.

However, this power saving setting can sometimes cause problems like Error Code 43 and USB Device Not Recognized Error in Windows 10.

1. Open Control Panel on your computer.

2. On the Control Panel Screen, make sure that you are in “Category” view and click on System and Security.

3. On the System and Security Screen, click on Power Options.

4. On Power Options screen, click on Change Plan Settings link located next to the current Power Plan.

5. Next, click on Change Advanced Power Settings link.

6. On the next screen, click on USB Settings > USB selective suspend setting and select disabled option for “Plugged In” and also for “On Battery” in case you are using a Laptop.

7. Click on OK to save above settings.

6. Change Power Management Setting For USB Root Hub

1. Right-Click on Start button and then click on Device Manager option.

2. On the device Manager Screen, expand the entry for Universal Serial Bus Controllers.

3. Right-click on USB Root Hub and click on Properties.

4. On the Properties screen, click on Power Management tab and uncheck the option for “Allow the computer to turn off this device to save power” and click on OK.

In case you have more USB Root Hubs, you will need to repeat the above steps for them as well.

Note: You can recheck “Allow the computer to turn off this device to save power” option, in case this step has not helped in fixing USB device not recognized error on your computer.

7. Uninstall Faulty Device Drivers

The problem of USB device not recognized error in Windows 10 could be due to faulty, corrupted or missing device drivers.

This can be fixed by uninstalling faulty device drivers and allowing Windows to automatically reinstall them back on your computer.

Note: On rare occasions Windows may not install Device Drivers and you may end up with no USB Ports working.

1. Right-click on Start button and then click on Device Manager.

2. On the Device Manager screen, expand the entry for Universal Serial Bus Controllers.

Driver

3. In the expanded Universal Serial Bus Controllers, right-click on the faulty device and then click on the Properties option.

4. On the next screen, click on the Driver tab and then click on the Uninstall button.

5. On the pop-up, click on OK to confirm that you do want to Uninstall the driver.

6. Repeat the above steps for other affected devices

7. After all the affected devices are uninstalled, Restart your computer.

Once your computer restarts, Windows should automatically load the right drivers as required for your computer.